Here is the most advanced
line of product ever offered.

Patended & Patent pending.

Maple Sap Spouts and adaptors manufactured with the smallest tube and very thin intelligent walls: Made of flexible ultra-resistant, transparent plastics.

Plus, you don’t need to use a professional to drill the hole and to install the sap spout in your maple trees, the sap spout adapts to the hole even if it’s not a perfect round hole.

GD-SP-225: Sap Spout straight

Sap Spout straightt

The best and most efficient spout ever produced, fabricated with ultra-resistant transparent polycarbonate with UV or FDA. (Available in clear or transparent blue) without BPA.
This Sap Spout has an end tube wall of 0.025" with a very thin ¨intelligent¨ walls (from 0.023" to 0.035") distributed along all the length of (1.675") of the tube.
During the installation, the sap spout adapts the notch perfectly by reducing its diameter and shape according to the hardness of the bark and the oval shape of the hole which reduce drastically compartmentalization effect and reduce the impact on the health of the trees, ensuring high-vacuum micro leak free production, all these features add more days to collect better good quality saps water.
The strength needed for tapping is minimal, two light tap with our Tapping Hammer "GD-TL-HAMMER" will be sufficient.
Very Important: Removing the spout is easily made by hand by performing a quarter turn, in order to prevent peeling of the bark.
The tube installation directly onto the sap spouts with the multifunctional collar provide the best results assuring an easy installation and dismantlement of the spout without the need of cutting the tube.
The use of the 90° Star Adaptor (boot) allow user to improve the setup time assuring cleaning and storage for many years.
Using and replacing this revolutionary sap spout every year will reduce contamination and greatly improve your production.
The spout will stay in place for all the season, and will reduce significantly the work load, will provide lots more profits.
Very important with our products line a perfect installation can be done by everyone with a minimal formation.

GD-SP-115-225: Sap Spout 115°

Sap Spout 115°

Manufactured with our flexible polycarbonate and ultra-resistant with UV or FDA protection without BPA. (available in clear or transparent blue), this 115° thin walled sap spout has an extremity of 0.020". adapting to the maple tree notch by sealing to the bark , considerably reducing the compartmentalization effect and greatly reducing the impact on the trees. All these features prolong the sap flow and increases the quantity and quality of the sap water.
During the installation, the sap spout’s extremity perfectly adapts to the notch by reducing its diameter and shape according to the hardness of the bark and the oval shape of the notch, which ensures optimum harvest under high vacuum.
The sap spout will remain in place throughout the season thus reducing workload while increasing profits.
Very Important: Perfect installation of our products can be performed by any worker with minimal training.
Using our GD-TL-HAMMER hammer is essential. The strength needed for tapping is minimal, two light taps with our Tapping Hammer will be sufficient.
Removing the spout is easily made by hand by performing a quarter turn, in order to prevent peeling of the bark.
Using and replacing this revolutionary sap spout every year will reduce contamination and greatly improve your production.

GD-SP-BU-225: Sap Spout bucket

Sap Spout bucket

The best and most efficient bucket sap spout ever produced, fabricated with ultra-resistant transparent polycarbonate with UV or FDA. (available in clear or transparent blue) without BPA.
This Sap Spout has end tube walls of 0.025" with very thin ¨intelligent¨ walls (from 0.023" to 0.035’) distributed along all the length of (1.675") of the tube.
During the installation, the sap spout adapts the notch perfectly by reducing its diameter and shape according to the hardness of the bark and the oval shape of the hole which reduce drastically compartmentalization and reduce the impact on the trees, all these features add more days to collect more better good quality sap water.
Very Important: Removing the spout is easily made with a pair of grip by performing a quarter turn, in order to prevent peeling of the bark.
The installation with our Tapping Hammer "GD-TL-HAMMER" directly on the plastics pail cover hole (GD-B-CO) retains it and allows the bucket to be installed and removed very easily.
Using and replacing this revolutionary sap spout every year will reduce contamination and the compartmentalization effect, it will also improve your production.
More important: A perfect installation can be done by everyone with a minimal information.

GD-SPA-225: Adaptor 225

Adaptor 22

The best and most efficient adaptor ever produced, Fabricated with ultra-resistant transparent polycarbonate with UV or FDA (available in clear or transparent blue) without BPA.
This adaptor has end tube walls of 0.025" with very thin ¨intelligent¨ walls (from 0.023" to 0.035’) distributed along all the length of (1.575") of the tube.
During the installation, the sap spout adapts the notch perfectly by reducing its diameter and shape according to the hardness of the bark and the oval shape of the hole, which reduce drastically compartmentalization effect and reduce the impact on the trees, all these features add more days to collect better good quality saps water, ensuring high-vacuum micro leak free production. The strength needed for tapping is minimal, two light tap with our Plastic Hammer ¨GDMAR¨ will be sufficient.
Very Important: Removing the adaptor can be made by hand by performing a quarter turn, in order to prevent peeling of the bark.
The use of an old sap spouts will reduce the sap collected otherwise if it’s well cleaned. Using this revolutionary adaptor every year will reduce contamination and improve production,
The adaptor will stay in place for all the season, and will reduces significantly the work load and provides lots more profits and very important with our products line a perfect installation can be done by everyone with a minimal formation.

Descriptive list of (STARS) related accessories
GD-FT-A-90: Spout Adaptor 90° (Elbow)

Spout Adaptor 90° (Elbow)

Made of strong black nylon, the Spout Adaptor 90° (Elbow) is the perfect complement to the Sap Spout straightt by providing the option to put the drop at a 90° angle, on the best sap spouts ever made the Sap Spout straightt providing a fast installation, dismantlement, great disinfecting and easy storage on the multifunctional collar adaptor.

GD-FT-EL: End line fitting

End line fitting

Made of strong nylon, this parts includes two open tube's connectors, one closed tube connector (for tube storage). The strong hook provides a solid dismountable grip to secure the end of the line. All three connectors can be served for permanent or temporary installation by using the multifunctional collar GD-COLM-516. This will enable an easy access to the bush for maintenance or disinfection. All connector ends are mirrored polished for a perfect seal.
Ideal for the user who want to replace the spout every year and the drop after a short period.

GD-FT-T: T-Connector

T-Connector

Made of strong nylon, this parts includes 3 open tubes connectors and one closed tube connector. All four connectors can be served for permanent or temporary installation by using the multifunctional collar GD-COLM-516; this will enable an easy access to the bush for maintenance or disinfection. All connector ends are mirrored polished for a perfect seal. Ideal for the users who want to replace spout every year and the drop after a short period, the tube can be dismantled from without replacing the Tee.

GD-FT-U: Wire Union

Wire Union

This piece includes two open connectors for 5/16" tubing and a small hook to connect with the wire. The two connectors can be served for permanent or temporary installation by using the multifunctional collar GD-COLM-516 This will enable an easy access to the bush for maintenance or disinfection. All connector ends are mirrored polished for a perfect seal, made with a high impact nylon.

GD-FT-A-316: Tubing Adaptor 3/16''

Spout Adaptor 5/16'' to 3/16''

This reducer are made of strong nylon, to be install on our star sap spout to adapt a 3/16" tubes, allowing collect water without vacuum pump.

Made with a strong nylon.

GD-COLM-516: Multifunction Collar

Multifunction Collar

Made of strong nylon, this collar is used to secure the tube installation on the disposable maple sap spouts and all STARS line accessories, manually and without effort, preventing any possibility of micro leakage when added to a 5/16” tubing. This collar allows removing the sap spout, without having to cut the tube, for a perfect spring disinfection and retain the tube on the collar until the next season. This way the next harvest will be superior and the syrup will have a better quality.
The multifunctional collar gives also the opportunity to install and uninstall all the tubing system in the maple bush for maintenance.

GD-SEL-ELB: Saddle Elbow Connector

Saddle Elbow Connector

90° connector, made with a high impact nylon.

Considering the long-life time of the special stainless steel 304 collars, replacement parts for mainline connector tube are available.

GD-SEL-CAP: Cap for saddle

Cap for saddle

Cap, made with a high impact nylon
Considering the long-life time of the special stainless steel 304 collars, replacement parts for mainline connector tube are available.

GD-SEL-SEAL: Double sided Seal

Double sided Seal

Seal made with elastomer material which had long time memory offering perfect sealing action. Considering the long-life time of the special stainless steel 304 collars, replacement parts for mainline connector tube are available.

GD-SP-CAP: Multifunctional Cap

Multifunctional Cap

Multifunction Plug, this plug is made of Plastic and will be used for:
# 1 to close a notch in compartmentalized wood in the way to drill second hole without long-term damage for the tree.
# 2 to indicate location of previous tap holes.

GD-COLS: Tubing Saddle for tube 1/2", 3/4", 1", 1-1/4", 1-1/2" (including: connector and seal)

Tubing Saddle

Mainline Connector for tube ½ “, ¾ “, 1", 1¼", 1½"
A 9/16" Heavy duty Stainless Steel grade 304 Collar which will guarantee a very strong hold of the 90° connector and the elastomer gasket on the main tube. The connector end is mirrored polished for a perfect sealing action, can be positioned in all directions allowing better installation, can also be used to close a 7/16" hole simply by flipping the seal upside down.
So easy to install, 100% leaks proof. Must be used with our 5/16 plastic drill bit GD-DBP-5/16.

GD-COLC: Cap Saddle for tube 1/2" 3/4", 1", 1-1/4", 1-1/2" (including: cap and seal)

Cap Saddle

Mainline Plug for tube ½", ¾", 1", 1¼",1½"
A 9/16" Heavy-duty Stainless Steel grade 304 Collars which will guarantee a very strong hold of the cap and the elastomer gasket on the main tube.
The elastomer seal must be used with 5/16 plastic drill GD-DBP-5/16 and can also be used to replace 7/16" old leaking parts. So easy to install, 100% leaks proof.

GD-COL: Stainless Steel Collar grade 304 9/16" - size: 1/2", 3/4", 1", 1-1/4", 1-1/2"

Stainless Steel Collar grade 304

Extra Heavy duty Stainless Steel grade 304 collar 9/16" Wide 14,2 X ,6 MM ½", ¾", 1", 1¼",1½" for plastics tube where strength and long term service are required.

GD-COL: Stainless Steel Collar grade 304 5/8" 15.8mm X .8mm - size: 2", 3"

Stainless Steel Collar grade 304

Super Heavy duty Stainless Steel grade 304: 5/8" Wide 15,8MM X ,8 MM 2" and 3" for plastics tube where very strong strength and long term service are required.

GD-TL-HAMMER: Tapping Hammer

Tapping Hammer

A friendly user plastic hammer with its sharp bark chipper will be perfect to prepare the tree for the notch and to tap the spout in place, supplied with arm holder rope.

GD-TL-BRUSH: Snow Brush

Snow Brush

Fits to our hammer to make the job of tapping faster and more accurate.
Cleaning of the bark allows assessing the state of the tree bark and finding the previous years notches.
Very resistant black nylon bristles of 1.550" long, held in a plastic block.
Easily installed on the hammer by using the two stainless steel screws which are included.

GD-B-CO: Bucket Cover

Bucket Cover

Plastic bucket cover, made of plastics this cover will fit all buckets and prevent water to come in and preserve the quality of the sap. It is made to be used with our GD-SP-BU-225 bucket sap spout.

GD-DB-62: Tapping tree drill bit 6.2mm (.244'')

Drill bit for maple 1/4'' (0.221'')

(Patent pending)

The first drill bits specially designed to easily tap maple trees made on HSS steel protected against corrosion allowing fast and easy drilling of the tree hole. Suitable for our patented intelligent thin walls sap spout line.

GD-DBP-5/16: Drill bit 5/16'' triple lips for Mainline

Drill bit for pipe 5/16'' (0.312'')

Drill bit triple lips for mainline made of HSS steel protected against corrosion design for usage with battery drill for small, rapid and clean round hole on the mainline tube.